ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11. Discussed herein are Grades 1 and 6. The seamless pipes are drawn from a single billet of the material whereas the ASTM A333 Grade 6 Welded Pipe Specification mandates it be welded from a strip or sheet of the same material grade. The form of the pipes can vary as round or hydraulic in most cases.
| Product Name | ASTM A333 Low Temperature Steel Pipe |
| Dia. | 10.3-3620mm |
| Length | 3m -12m or as required |
| Thickness | 1.25-60mm |
| Standard | GB,ASTM,DIN,BS,JIS |
| Technique | Cold drawn / Hot rolled |
| Surface Treatment | 3PE/3LPE, FBE, Galvanized ETC. |
| Thickness Tolerance | ±0.01mm~ ±0.25mm |
| Material | ASTM A333 |
| Application | oil and gas, buildings, housing, and heavy equipment. |
| MOQ | 1 ton , We can accept sample order. |
| Shipment Time | Within 15-20 workdays after receiving deposit or workable L/C |
| Export Packing | Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required |
| Capacity | 250,000 tons/year |
ASTM A333 Chemical Composition:
| Chemical Composition of ASTM A333 |
| Element | Grade 1, % | Grade 3, % | Grade 4, % | Grade 6, % | Grade 7, % | Grade 8, % | Grade 9, % | Grade 10, % | Grade 11, % |
| C | 0.3 | 0.19 | 0.12 | 0.3 | 0.19 | 0.13 | 0.2 | 0.2 | 0.1 |
| Mn | 0.40–1.06 | 0.31–0.64 | 0.50–1.05 | 0.29–1.06 | 0.9 | 0.9 | 0.40–1.06 | 1.15–1.50 | 0.6 |
| P | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.035 | 0.025 |
| S | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 | 0.015 | 0.025 |
| Si | ... | 0.18–0.37 | 0.08–0.37 | 0.10 min | 0.13–0.32 | 0.13–0.32 | ... | 0.10–0.35 | 0.35 |
| Ni | ... | 3.18–3.82 | 0.47–0.98 | 0.4 | 2.03–2.57 | 8.40–9.60 | 1.60–2.24 | 0.25 | 35.0–37.0 |
| Cr | ... | ... | 0.44–1.01 | 0.3 | ... | ... | ... | 0.15 | 0.5 |
| Cu | ... | ... | 0.40–0.75 | 0.4 | ... | ... | 0.75–1.25 | 0.15 | ... |
| Al | ... | ... | 0.04–0.30 | ... | ... | ... | ... | 0.06 | ... |
| V | ... | ... | ... | 0.08 | ... | ... | ... | 0.12 | ... |
| Cb | ... | ... | ... | 0.02 | ... | ... | ... | 0.05 | ... |
| Mo | ... | ... | ... | 0.12 | ... | ... | ... | 0.05 | 0.5 |
| Co | ... | ... | ... | ... | ... | ... | ... | ... | 0.5 |
*For Grade 1 and 6, each reduction of 0.01% C below 0.30%, an increase of 0.05 % Mn above 1.06 % would be permitted to a max. of 1.35%.
*For Grade 6, the limit for columbium may be increased up to 0.05 % on heat analysis and 0.06 % on product analysis.
ASTM A333 Physical properties :
| ASTM A333 | Tensile Strength, min. | Yield Strength, min. | Elongation %, min. |
| Grade | psi | MPa | psi | MPa | Longitudinal | Transverse |
| Grade 1 | 55 000 | 380 | 30 000 | 205 | 35 | 25 |
| Grade 3 | 65 000 | 450 | 35 000 | 240 | 30 | 20 |
| Grade 4 | 60 000 | 415 | 35 000 | 240 | 30 | 16.5 |
| Grade 6 | 60 000 | 415 | 35 000 | 240 | 30 | 16.5 |
| Grade 7 | 65 000 | 450 | 35 000 | 240 | 30 | 22 |
| Grade 8 | 100 000 | 690 | 75 000 | 515 | 22 | ... |
| Grade 9 | 63 000 | 435 | 46 000 | 315 | 28 | ... |
| Grade 10 | 80 000 | 550 | 65 000 | 450 | 22 | ... |
| Grade 11 | 65 000 | 450 | 35 000 | 240 | 18 | ... |
*The elongation values are furnished on the basis of standard round 2 inch or 50 mm(or 4D) specimens.
| NPS | O.D | ANSI B36.10 B36.19 Wall Thickness |
| DN(mm) | inch | mm | Sch5S | Sch10S | Sch10 | Sch20 | Sch30 | Sch40S | STD | Sch40 | Sch60 | Sch80 | XS | Sch80S | Sch100 | XXS |
| 8 | 1/4 | 13.72 | - | 1.65 | - | - | - | 1.73 | 1.73 | 1.73 | - | 3.02 | 3.02 | 3.02 | - | - |
| 10 | 3/8 | 17.14 | - | 1.65 | - | - | - | 2.31 | 2.31 | 2.31 | - | 3.2 | 3.2 | 3.2 | - | - |
| 15 | 1/2 | 21.34 | 1.65 | 2.11 | - | - | - | 2.77 | 2.77 | 2.77 | - | 3.73 | 3.73 | 3.73 | - | 7.47 |
| 20 | 3/4 | 26.67 | 1.65 | 2.11 | - | - | - | 2.87 | 2.87 | 2.87 | - | 3.91 | 3.91 | 3.91 | - | 7.82 |
| 25 | 1 | 33.4 | 1.65 | 2.77 | - | - | - | 3.38 | 3.38 | 3.38 | - | 4.55 | 4.55 | 4.55 | - | 9.09 |
| 32 | 1 1/4 | 42.16 | 1.65 | 2.77 | - | - | - | 3.56 | 3.56 | 3.56 | - | 4.85 | 4.85 | 4.85 | - | 9.7 |
| 40 | 1 1/2 | 48.26 | 1.65 | 2.77 | - | - | - | 3.68 | 3.68 | 3.68 | - | 5.08 | 5.08 | 5.08 | - | 10.16 |
| 50 | 2 | 60.32 | 1.65 | 2.77 | - | - | - | 3.91 | 3.91 | 3.91 | - | 5.54 | 5.54 | 5.54 | - | 11.07 |
| 65 | 2 1/2 | 73.02 | 2.11 | 3.05 | - | - | - | 5.16 | 5.16 | 5.16 | - | 7.01 | 7.01 | 7.01 | - | 14.02 |
| 80 | 3 | 88.9 | 2.11 | 3.05 | - | - | - | 5.49 | 5.49 | 5.49 | - | 7.62 | 7.62 | 7.62 | - | 15.24 |
| 90 | 31/2 | 101.6 | 2.11 | 3.05 | - | - | - | 5.74 | 5.74 | 5.74 | - | 8.08 | 8.08 | 8.08 | - | - |
| 100 | 4 | 114.3 | 2.11 | 3.05 | - | - | - | 6.02 | 6.02 | 6.02 | - | 8.56 | 8.56 | 8.56 | - | 17.12 |
| 125 | 5 | 141.3 | 2.77 | 3.4 | - | - | - | 6.55 | 6.55 | 6.55 | - | 9.53 | 9.53 | 9.53 | - | 19.05 |
| 150 | 6 | 168.28 | 2.77 | 3.4 | - | - | - | 7.11 | 7.11 | 7.11 | - | 10.97 | 10.97 | 10.97 | - | 21.94 |
| 200 | 8 | 219.08 | 2.77 | 3.4 | - | 6.35 | 7.04 | 8.18 | 8.18 | 8.18 | 10.31 | 12.7 | 12.7 | 12.7 | 15.09 | 22.22 |
| 250 | 10 | 273.05 | 3.4 | 3.76 | - | 6.35 | 7.8 | 9.27 | 9.27 | 9.27 | 12.7 | 12.7 | 12.7 | 15.09 | 18.26 | 25.4 |
| 300 | 12 | 323.85 | 3.96 | 4.57 | - | 6.35 | 8.38 | 9.52 | 9.52 | 10.3 | 14.27 | 12.7 | 12.7 | 17.48 | 21.44 | - |
| 350 | 14 | 355.6 | 3.96 | 4.78 | 6.35 | 7.92 | 9.52 | *9.52 | 9.52 | 11.13 | 15.09 | 12.7 | 12.7 | 19.05 | 23.83 | - |
| 400 | 16 | 406.4 | 4.19 | 4.78 | 6.35 | 7.92 | 9.52 | *9.52 | 9.52 | 12.7 | 16.66 | 12.7 | 12.7 | 21.44 | 26.19 | - |
| 450 | 18 | 457.2 | 4.19 | 4.78 | 6.35 | 7.92 | 11.12 | *9.52 | 9.52 | 14.27 | 19.05 | 12.7 | 12.7 | 23.82 | 29.36 | - |
| 500 | 20 | 508 | 4.78 | 5.54 | 6.35 | 7.92 | 12.7 | *9.52 | 9.52 | 15.09 | 20.62 | 12.7 | 12.7 | 26.19 | 32.54 | - |
| 550 | 22 | 558.8 | 4.78 | 5.54 | 6.35 | 7.92 | 12.7 | *9.52 | 9.52 | - | 22.22 | 12.7 | 12.7 | 28.58 | 34.92 | - |
| 600 | 24 | 609.6 | 5.54 | 6.35 | 6.35 | 7.92 | 14.27 | *9.52 | 9.52 | 17.48 | 24.61 | 12.7 | 12.7 | 30.96 | 38.89 | - |
| 650 | 26 | 660.4 | - | *7.92 | 7.92 | 12.7 | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 700 | 28 | 711.2 | - | *7.92 | 7.92 | 12.7 | 15.88 | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 750 | 30 | 762 | 6.35 | *7.92 | 7.92 | 12.7 | 15.88 | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 800 | 32 | 812 | - | *7.92 | 7.92 | 12.7 | 15.88 | *9.52 | 9.52 | 17.48 | - | 12.7 | 12.7 | - | - | - |
| 850 | 34 | 863.6 | - | *7.92 | 7.92 | 12.7 | 15.88 | *9.52 | 9.52 | 17.48 | - | 12.7 | 12.7 | - | - | - |
| 900 | 36 | 914.4 | - | *7.92 | 7.92 | 12.7 | 15.88 | *9.52 | 9.52 | 19.05 | - | 12.7 | 12.7 | - | - | - |
| 950 | 38 | 965.2 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1000 | 40 | 1016 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1050 | 42 | 1066.8 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1100 | 44 | 1117.6 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1150 | 46 | 1168.4 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1200 | 48 | 1219.2 | - | *7.92 | - | - | - | *9.52 | 9.52 | - | - | 12.7 | 12.7 | - | - | - |
| 1300 | 52 | 1320.8 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - | - |
| 1350 | 54 | 1371.6 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - | - |
| 1400 | 56 | 1422.4 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - | - |
| 1500 | 60 | 1524 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
| 1600 | 64 | 1625.6 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
| 1700 | 68 | 1727.2 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
| 1800 | 72 | 1828.8 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
| 1900 | 76 | 1930.4 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
| 2000 | 80 | 2032 | - | - | - | - | - | - | 9.52 | - | - | - | 12.7 | - | - |
|
Jiangsu Fulilai Steel Co.,Ltd.is a professional and reputable steel manufacturer and exporter from Jinan, China. We have steel factories both in Liaocheng and Wuxi which are well-known as the two biggest steel production and distribution centers in China. We can provide stainless steel pipes ,stainless steel plates , stainless steel bars , stainless steel coils, Stainless steel square tubes ,stainless H-beam , stainless angle steel , stainless steel channel ,stainless steel fittings as well as galvanized steel products and other related ones.
